Connect with us

Here is a look at a unique extrication and stabilization that took place in Seattle, Washington. The first Facebook post is video from an area camera that captured the power pole falling on the vehicle.

Per the Seattle Fire Department’s Facebook page:

Seattle Fire’s Rescue 1 was called to a multi-company extrication with Boeing, South King, and Tukwila Fire. Over fifteen power lines were down and 1 patient trapped in a car. Using Rescue 1’s hydraulic-fusion struts, the only of their kind in the area, 1 patient was safely extricated and a total of 2 patients were transported with minor injuries to nearby hospitals.

Mike Smith, Absolute Rescue's Editor in Chief, is a veteran of the fire/rescue service in Michigan, who also works in the automotive industry as a designer. Have an idea of suggestion for the site? Contact Mike here

Quick Tips

Motor City Monday Extrication Tip; Electric Vehicle Battery Pack Reinforcements

As vehicles change, our knowledge must continue to keep pace and expand our mental toolbox.  The extrication tool manufacters have kept pace with their cutters, spreaders, and rams to combact these strong steels. It’s our job to stay

Published

on

Electric Vehicle Battery Pack Reinforcements

Like everything in life, vehicles are changing, well vehicles keep changing. World leaders are pushing green vehicles which will increase our interactions with electric vehicles.  First off, let’s look at the common acronyms of several common green and traditional vehicles.

  • BEV = Battery Electric Vehicle
  • PHEV = Plug-in Hybrid Electric Vehicle
  • HEV = Hybrid Electric Vehicle
  • ICE = Internal Combustion Engine

Unlike BEV, PHEV, and HEV, the term ICE refers to the engine itself, rather than the type of car. Normal/traditional gasoline and diesel cars have internal combustion engines.

Electric Vehicles present several challenges to firefighters with battery fires leading the way.  The automakers are designing and engineering extremely strong protective cages around battery packs. We are no strangers finding boron, martensite, and press hardened steels in the pillars, roof rails, and fender wells.  However, in a BEV, the rocker panels and cross vehicle reinforcements will have boron and martensite steels to protect the battery pack from collisions that could comprise it.  In the images below, the 2021 Ford Mustang Mach E has this strong steel in the rocker panels and cross vehicle reinforcements.  The automakers can tie in the strong rocker panels into the front fender wells requiring us to make deep cuts during a dash lift or roll.


The image below shows the different testing vehicles are subjected to and a strong battery cage can not only protect the battery pack, but also the occupants of the vehicle.

As vehicles change, our knowledge must continue to keep pace and expand our mental toolbox.  The extrication tool manufacturers have kept pace with their cutters, spreaders, and rams to combat these strong steels. It’s our job to stay current where the automakers are using strong steel.

Images from several Great Designs in Steel (GDIS) 2021 Presentations.

Continue Reading

Heavy Rescue

Dump truck rolled onto a car

The dump truck attempted to change lanes, struck the passenger car, the load inside the rear of the dump truck shifted, causing the vehicle to list to one side and roll onto the driver’s side roof of the vehicle.

Published

on

Manheim Township, PA

First off, both drivers required extrication from their vehicles and were taken to the hospital with non life-threatening injuries.

The dump truck attempted to change lanes, struck the passenger car, the load inside the rear of the dump truck shifted, causing the vehicle to list to one side and roll onto the driver’s side roof of the vehicle.

Stabilization and Extrication

Towing and Recovery

Continue Reading

Heavy Rescue

Big Rig Technician Training (2/27/2020)

Miami-Dade Fire Rescue played host this week to firefighters from around North America for a three-day training conference on heavy vehicle rescues.

Published

on

Big Rig Technician Training (2/27/2020)

Miami-Dade Fire Rescue played host this week to firefighters from around North America for a three-day training conference on heavy vehicle rescues. A variety of rescue scenarios were in place at MDFR’s Urban Search & Rescue Training Facility in Kendall for the grand finale of the course on Thursday afternoon. Technical Rescue Technicians from fire departments as far away as Ontario, South Dakota and West Virginia participated in the exercises that required rescuing victims in unique traffic crash situations.

Pictures below from the Metro-Dade Firefighters Local 1403 and Miami-Dade Fire Rescue Facebook Pages.

Continue Reading